Girl In the OC said:
Linksys???
Wireless - G???
Wireless - N???
First of all, the Wireless N spec is not finalized yet. But there is hardware that conforms to the draft spec that is readily available. Wireless N is significantly faster than Wireless G and it has a longer broadcast range. (Wireless G has a net max bit rate of 54 mbps and a range of up to 100m. Wireless N has a net max bit rate of 300 mbps and a range of up to 300m)
Next, if you want to run XP instead of Vista, other than a little research finding the right drivers, the biggest problem you will probably run into is getting the XP install process to start. If you install XP, then you will wipe your Vista partition clean, so you don't have to worry about any clean up. However, the drivers to support a SATA hard drive aren't part of XP, and having checked, I see your machine does have a SATA drive. During the install process, XP does allow you to hit F6 to load disk drivers from a floppy, but I see your machine doesn't have a floppy drive. (And having just put XP on a Vista laptop without a floppy last night, I can assure you that it won't let you use a USB memory stick instead)
But there is another way around the problem. There is a package called
NLite that will allow you to create a "slip stream" installation disk. (You can see instructions on the process
here ). You'll have to do a little research to find the drivers that you need BEFORE YOU WIPEOUT Vista. (Assuming it's your only machine) so that you have a disk prepared. (When I installed XP on a Dell Inspiron 1525 last night, I couldn't use my ethernet card or wireless until I got XP drivers for them, so you don't want to paint yourself into a corner here)
It's really not difficult. But it's a good idea to know what you are headed into before hand.