Oversized Curtain Rod Help

D

dealcatcher

New member
Anyone know where I can buy an oversized curtain rod in brushed nickel. I've already checked West Elm, Z Gallerie, and Crate and Barrell. None of them are wide enough.

Window 1 needs to have a rod > 118"
Window 2 needs to have a rod > 168"

 

Attachments

  • image.jpg
    image.jpg
    128.4 KB · Views: 264
Not a problem. Hit up JCP for some rod extenders. They'll have them 40" long. Are you sure you want a 14 foot spans of curtain, though? I'm guessing there are several separate windows here.
 
I'm trying to avoid from having to buy two rods. One of my rods is only a couple of inches short of covering the panel that has 3 windows. Just trying to keep it cost effective.
 
Room and Board has 12 foot rods.

http://www.roomandboard.com/rnb/windowtreatment/detail.do?productGroup=24694&catalog=room&category=rm_cst_window&subcategory=cst_windows
 
bones said:
Room and Board has 12 foot rods.

http://www.roomandboard.com/rnb/windowtreatment/detail.do?productGroup=24694&catalog=room&category=rm_cst_window&subcategory=cst_windows
Click to expand...

Thanks Bones but those are way too expensive for me. It's $438 for an 11" rod.
 
dealcatcher said:
bones said:
Room and Board has 12 foot rods.

http://www.roomandboard.com/rnb/windowtreatment/detail.do?productGroup=24694&catalog=room&category=rm_cst_window&subcategory=cst_windows
Click to expand...

Thanks Bones but those are way too expensive for me. It's $438 for an 11" rod.
Click to expand...

Yea - they are but figured I link you anyway.  Unfortunately, "modern" makes everything more expensive. Good luck in your search.
 
Dealtcatcher, if cost-effective & modern are your criteria, the best thing you can do is get some electrical conduit, a pipe cutter, finials of your choice, spray paint if you want it, and make your own. Voila.
 
P.S. Closet rod if you want to go with wood. Same as above.

Either one would be way cheaper than buying an extended length curtain rod set.
 
The Motor Court Company said:
we special ordered from a catalog in JCP. around $70
Click to expand...

Is yours brushed nickel and at least 1 1/4" inch diameter? Are the rod ends similar looking to my pic above? Thanks!
 
SoCal said:
Dealtcatcher, if cost-effective & modern are your criteria, the best thing you can do is get some electrical conduit, a pipe cutter, finials of your choice, spray paint if you want it, and make your own. Voila.
Click to expand...

Trying to be cost effective but not that cost effective. ; ) Don't trust myself with the DIY plus open to spending around 50-100 per rod.
 
You must log in or register to reply here.
Back
Top